Sei in: Home News Numerosi updates del bios per motherboard di Asus, Intel, ECS |
|
Numerosi updates del bios per motherboard di Asus, Intel, ECS |
a cura di Giacomo Usiello | pubblicato il 19 luglio 2011
|
|
|
|
|
|
|
|
Diversi produttori di schede madri, tra cui ASUS, Intel e ECS, hanno rilasciato degli aggiornamenti del bios di numerose motherboard. Di seguito riportiamo i link per il download diretto dei file ed una descrizione delle feature a corredo dell'aggiornamento.
Nota importante: se la richiesta di uno o più file della lista seguente genera un errore del browser consigliamo l'utilizzo di uno dei client ftp presenti nella sezione dedicata presente nell'area Web per l'esecuzione del download.
Aopen- vKM400Am-S BIOS version R1.09
- Modified SilentBios function : Used 'High','Medium','Low' modes when define fixed fan speed.
- MZ915-M BIOS version R1.03
- Set "On-Chip Secondary PCI IDE" default value to be "Enabled".
ASRock - P4VM8 BIOS version 1.20
- Added the patch for Turkish Win98SE.
- The system would work fine under 98SE when Bios setup "Parallel Port Mode" set to "Normal" or "Bi-Directional". < More >
- 775V88+ BIOS version 1.40
- Added the patch for Turkish Win98SE.
- System should work fine when installing 4*1G memory.
- K8Upgrade-PCIE BIOS version 1.10
- Cool 'n' Quiet table updated.
- P4i65GV BIOS version 1.90
- Added setup item "Max CPUID Value Limit"
- Updated CPU Microcode.
- P4VM800 BIOS version 1.10
- Added the patch for Turkish Win98SE.
- P4V88 BIOS version 1.80
- Added the patch for Turkish Win98SE.
- P4V88+ BIOS version 1.30
- Added the patch for Turkish Win98SE.
ASUS Final- P5ND2 SLI BIOS version 0203
- K8V-SE Deluxe BIOS version 1007
- Support new CPUs. Please refer to our website at: http://www.asus.com.tw/support/cpusupport/cpusupport.aspx
- K8V (basic) BIOS version 1007
- Support new CPUs. Please refer to our website at: http://www.asus.com.tw/support/cpusupport/cpusupport.aspx
BetaBiostar - NF4UL-A9 BIOS version 2005/07/12 with bootup Biostar splash screen
- iDEQ 330P BIOS version 2005/07/13 with | without bootup Biostar splash screen
- NF4ST-A9 BIOS version 2005/07/12 with bootup Biostar splash screen
ChainTech - MP4M800 BIOS version 2.0
- Fixed that "Hard Disk Boot Priority" display error.
DFI ECS - RS482-M754(1.0) BIOS version 1.0A
- Support AMD K8 Rev:E6 CPU.
- Patch 2.1T support CD cannot autorun.
- RS482-M(1.0A) BIOS version 1.0
- 915-M5GL(1.1) BIOS version 1.0f
- Fixed BBS issue.(After changing IDE mode,cannot change boot device priority)
- Update 0f43h micro code.
- Fix 1394 item auto hidden when item set disable.
Epox - EP-8HDAI PRO BIOS version 05.06.28
- Athlon64 E3 2.4G(ID=20FC0h)67W 1.40v
- Sempron E6 1.4G/1.6G/1.8G/2.0G (ID=20FC2h) 59W 1.40V
- EP-8HEAI BIOS version 05.06.30
- Athlon64 E3 2.4G(ID=20FC0h)67W 1.40v
- Sempron E6 1.4G/1.6G/1.8G/2.0G (ID=20FC2h) 59W 1.40V
Gigabyte Final- GA-8I945P Pro BIOS version F7
- Fixed 830 & 840 CPU show incorrect FSB & Ratio at POST
- GA-8I945P Dual Graphic BIOS version F6
- Fixed 830 & 840 CPU show incorrect FSB & Ratio at POST
- GA-8I945G Pro BIOS version F7
- Fixed 830 & 840 CPU show incorrect FSB & Ratio at POST
Intel - D925XBC BIOS version 0463 Express | Iflash
- Updated new CPU microcode.
- Fixed issue for module changes not updated with Intel Integrator Toolkit (ITK Tool) when BIOS flashing with Intel Express BIOS Update (EBU).
- Fixed RPM logo not able to update issue.
- Fixed On Screen Branding (OSB) logo not displayed when system wake from hibernation.
- Fixed ECC error not log in Event Log issue.
- Fixed issue where Event log is not marked as read after user selecting “Mark event log as read” in the BIOS Setup Page.
- Set PCIe “Compliance Test Pattern” to enable for manufacturing mode.
- Workaround destroy and recovery issue.
- Set ECC support to default enables.
- Updated video BIOS to version 1216.
- Updated SMBIOS support for PCI Express slot per SMBIOS 2.4 Specification.
- Corrected badge placement when badge is displayed with .BMP logo files.
- Fixed “protected CMOS data” being cleared in manufacturing mode.
- Fixed Enhanced Intel Speedstep Technology (EIST) not able to step down when using 3.0GHz CPU.
- Fixed Wake on LAN (WOL) not functioning issue on specific LAN vendor.
- Removed workaround for certain Graphic card.
- Optimizing F000 segment.
- Updated with new audio verb table.
- D925XECV2 BIOS version 0463 Express | Iflash
- Updated new CPU microcode.
- Fixed issue for module changes not updated with Intel Integrator Toolkit (ITK Tool) when BIOS flashing with Intel Express BIOS Update (EBU).
- Fixed RPM logo not able to update issue.
- Fixed On Screen Branding (OSB) logo not displayed when system wake from hibernation.
- Fixed ECC error not log in Event Log issue.
- Fixed issue where Event log is not marked as read after user selecting “Mark event log as read” in the BIOS Setup Page.
- Set PCIe “Compliance Test Pattern” to enable for manufacturing mode.
- Workaround destroy and recovery issue.
- Set ECC support to default enables.
- Updated video BIOS to version 1216.
- Updated SMBIOS support for PCI Express slot per SMBIOS 2.4 Specification.
- Corrected badge placement when badge is displayed with .BMP logo files.
- Fixed “protected CMOS data” being cleared in manufacturing mode.
- Fixed Enhanced Intel Speedstep Technology (EIST) not able to step down when using 3.0GHz CPU.
- Fixed Wake on LAN (WOL) not functioning issue on specific LAN vendor.
- Removed workaround for certain Graphic card.
- Optimizing F000 segment.
- Updated with new audio verb table.
- D925XEBC2 BIOS version 0463 Express | Iflash
- Updated new CPU microcode.
- Fixed issue for module changes not updated with Intel Integrator Toolkit (ITK Tool) when BIOS flashing with Intel Express BIOS Update (EBU).
- Fixed RPM logo not able to update issue.
- Fixed On Screen Branding (OSB) logo not displayed when system wake from hibernation.
- Fixed ECC error not log in Event Log issue.
- Fixed issue where Event log is not marked as read after user selecting “Mark event log as read” in the BIOS Setup Page.
- Set PCIe “Compliance Test Pattern” to enable for manufacturing mode.
- Workaround destroy and recovery issue.
- Set ECC support to default enables.
- Updated video BIOS to version 1216.
- Updated SMBIOS support for PCI Express slot per SMBIOS 2.4 Specification.
- Corrected badge placement when badge is displayed with .BMP logo files.
- Fixed “protected CMOS data” being cleared in manufacturing mode.
- Fixed Enhanced Intel Speedstep Technology (EIST) not able to step down when using 3.0GHz CPU.
- Fixed Wake on LAN (WOL) not functioning issue on specific LAN vendor.
- Removed workaround for certain Graphic card.
- Optimizing F000 segment.
- Updated with new audio verb table.
- D925XCV BIOS version 0463 Express | Iflash
- Updated new CPU microcode.
- Fixed issue for module changes not updated with Intel Integrator Toolkit (ITK Tool) when BIOS flashing with Intel Express BIOS Update (EBU).
- Fixed RPM logo not able to update issue.
- Fixed On Screen Branding (OSB) logo not displayed when system wake from hibernation.
- Fixed ECC error not log in Event Log issue.
- Fixed issue where Event log is not marked as read after user selecting “Mark event log as read” in the BIOS Setup Page.
- Set PCIe “Compliance Test Pattern” to enable for manufacturing mode.
- Workaround destroy and recovery issue.
- Set ECC support to default enables.
- Updated video BIOS to version 1216.
- Updated SMBIOS support for PCI Express slot per SMBIOS 2.4 Specification.
- Corrected badge placement when badge is displayed with .BMP logo files.
- Fixed “protected CMOS data” being cleared in manufacturing mode.
- Fixed Enhanced Intel Speedstep Technology (EIST) not able to step down when using 3.0GHz CPU.
- Fixed Wake on LAN (WOL) not functioning issue on specific LAN vendor.
- Removed workaround for certain Graphic card.
- Optimizing F000 segment.
- Updated with new audio verb table.
Magic-Pro - MP-P4VM-800X BIOS version M02
MSI- K8N Neo3 BIOS version 1.1
- Update NVRAID version to 5.27.
- Update NVPXE version to 2.12.
- Update NVMM version to 4.94.
- Support Sempron 754 E3 2000MHz/59W & 2000MHz/62W CPU.
- 925X Neo Platinum BIOS version 1.6
- Correct SATA Port number string display error in SETUP.
- 925XE Neo Platinum BIOS version 1.6
- Correct SATA Port number string display error in SETUP.
- K7N2GM2 Series BIOS version 3.4
- Fix Samrt Fan function failed after system resume from S3.
- P4N Diamond BIOS version 1.2
- Improve FSB 533 2.66Ghz cpu compatibility.
- Modify page up & page down function to sellect.
- Modify CPU Voltage display on Cell Menu.
- Improve SmithField processor compatibility.
- Improve memory compatibility.
- Update Nvidia code.
PC-Chips - A21G(V1.0) BIOS version 050708S
- Patch code for onboard VGA
- M965G(V1.1A) BIOS version 050530S
- Fixed system was instable if run 3DMarks
- M965GV(V1.1A] BIOS version 050530S
- Fixed system was instable if run 3DMarks
- M861G(V1.6A) BIOS version 050713S
- Patch code for AMD K8 E3 & E4 CPU
- M860(v1.0) BIOS version 050629S
- Support AMD K8 Sempron E6 CPU
Soltek- SL-B9A-FGR BIOS version 1.9
- SL-B9C-FGR BIOS version E1.2
- SL-B9D-FGR BIOS version G1.5
- SL-K890-754G BIOS version G1.2
- SL-K890Pro-939 BIOS version T1.4
- SL-NF4Pro-939 BIOS version P1.2
- SL-NF4-754RL BIOS version K1.2
- SL-K8TPro-939 BIOS version W1.6
- SL-K8TPro-754 BIOS version D1.2
- SL-K8T-939FL BIOS version F1.2
- SL-K8M800I-R BIOS version N1.2
- SL-K8M800I-RL BIOS version N1.2L
- SL-K8AV2-R/SL-K8AV2-RL BIOS version D1.7RL
Supermicro Tyan Final- Tomcat i875PF BIOS version 1.06
- Fixed the issue that will display a letter following 'Entering setup¡...' when 'del' key pressed to enter setup menu
- Fixed the issue where memory count will show incorrect amounts when the ICH5 chipset is set to RAID mode
- Updated the Adaptec SATA Option ROM to v3.2.1-1255
- Updated CPU micro code to support E0 stepping P4
- Prescott CPU's with 533MHz FSB
[Risorse correlate]
|
|
|